Position the subwoofer at least 2 feet 0. It is designed to stand firmly on a traditional computer monitor. For better stereo imaging, try placing the satellite speakers 5 in It is not necessary to switch off your speaker system each time you turn off your PC. Not finding what you are looking for? Top View Wall-mount brackets For your convenience, two wall-mount brackets are enclosed for use on the rear speakers.
|Date Added:||11 December 2013|
|File Size:||24.88 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Disconnect lime green, black and yellow signal cable plugs from the Santa Cruz Sound Card. Subwoofer placement The placement of the Aktec in your room affects its output. Press this button to turn up the volume.
I pulled it out before I took the picture I went ahead and replaced all of the 4. All other adjustments for the speaker system are made using the computer or keyboard audio controls, including overall system volume. No additional equalization is necessary. The subwoofer, the Right Front satellite and the Left Front satellite will each sound a test tone at the same time. It has two stands allowing two different mounting positions.
ADA / 4J FS | Altec Lansing ADA Dolby Digital
Answered on May 20, The speaker system can remain powered. It’s ratings are 5. In addition, excellent results are obtained when the surround speakers are in line with, and slightly above the listener’s ears. Table of problems, possible causes, and solutions Symptoms Possible Problem Solution No sound from any speakers Power is not turned on Press Power On button at the rear of the subwoofer. Don Hart Level 2 Expert Answers. Using the concepts discussed lansingg subwoofer placement, Acoustic Port information, front speaker placement, center speaker placement, alttec rear speaker placement above, a typical surround 5.
If not, connect AC power.
The port needs a minimum of 4 in 10 cm clearance from a wall or other obstruction. Once software settings are verified and determined to be correct, proceed with the Table of problems, possible causes, and solutions below.
The center speaker is unstable without lansint stand installed and could sustain damage from a fall.
Deactivate the computer keyboard mute control. This will enable all six speakers to operate. Do not touch the exposed ends of the triple cable plugs with your fingers during this procedure.
Increase the subwoofer volume by adjusting the Subwoofer Level control at the back of the subwoofer. If you have a 21 in. Subwoofer Level control The Subwoofer Level rotary control is located at the rear of the subwoofer.
A spare fuse is included with your system. The optimum wda995 level setting varies for different types of music. The subwoofer’s tone will be a lower frequency than the tone sounded through the satellites. All other connections are made in the same way. This plug is inserted into the left front jack with the brown color marking located at the back of the subwoofer. The subwoofer and the Center speaker will each sound a test tone at the same time. It shows typical settings for popular music types and DVD audio.
Dell Altec Lansing Ada995 5.1 THX Certified Computer Speakers
To prevent electric shock do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. This allows a variety of roomplacements.
The center speaker comes assembled for horizontal placement. Flat panel monitors are too narrow to mount the center speaker properly.